Processor 1 ID = 0
Number of cores 4 (max 8)
Number of threads 4 (max 16)
Name Intel Core i5 4460
Codename Haswell
Specification Intel(R) Core(TM) i5-4460 CPU @ 3.20GHz
Package (platform ID) Socket 1150 LGA (0x1)
CPUID 6.C.3
Extended CPUID 6.3C
Core Stepping C0
Technology 22 nm
TDP Limit 84.0 Watts
Tjmax 100.0 °C
Core Speed 3200.4 MHz
Multiplier x Bus Speed 32.0 x 100.0 MHz
Stock frequency 3200 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX, AVX2, FMA3
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 4 x 256 KBytes, 8-way set associative, 64-byte line size
L3 cache 6 MBytes, 12-way set associative, 64-byte line size
FID/VID Control yes
Turbo Mode supported, enabled
Max non-turbo ratio 32x
Max turbo ratio 34x
Max efficiency ratio 8x
O/C bins none
Ratio 1 core 34x
Ratio 2 cores 34x
Ratio 3 cores 33x
Ratio 4 cores 32x
TSC 3200.4 MHz
APERF 3200.4 MHz
MPERF 3200.5 MHz
IA Voltage Mode PCU adaptive
IA Voltage Offset 0 mV
GT Voltage Mode PCU adaptive
GT Voltage Offset 0 mV
LLC/Ring Voltage Mode PCU adaptive
LLC/Ring Voltage Offset 0 mV
Agent Voltage Mode PCU adaptive
Agent Voltage Offset 0 mV
Temperature 0 71°C (159°F) [0x1D] (Core #0)
Temperature 1 72°C (161°F) [0x1C] (Package)
Power 0 29.69 W (Package)
Power 1 20.42 W (IA Cores)
Power 2 n.a. (GT)
Power 3 9.27 W (Uncore)
Power 4 2.92 W (DRAM)
Voltage 0 0.96 Volts (VID)
Voltage 1 +0.00 Volts (IA Offset)
Voltage 2 +0.00 Volts (GT Offset)
Voltage 3 +0.00 Volts (LLC/Ring Offset)
Voltage 4 +0.00 Volts (System Agent Offset)
voila les donné du proco
Comment faire pour le faire baisser ? je ne sais pas si ma pate thermique est sèche ou doit elle être stp ?