j´ai un pb avec mon graveur.quand je grave il me dis.
14:52:45 started simulation ( normal jusque la)
14:54:14 yamahaCRW88245 invalid block adresse
14:54:15 yamahaCRW88245 invalid writestate
14:54:15 yamahaCRW88245 could not perform endtrack
14:54:16 yamahaCRW88245 simulation failed

voila si il y a qqun qui comprend il pourrais m´espliquer que faire

j´ai fais enregistrer le message d´erreure et il dis sa.Mot pour mot

1508-0218-3346-9839-8140-1153

Windows 98 4.10
WinAspi: File ´Wnaspi32.dll´: Ver=1, 0, 0, 0, size=36864 bytes, created 05/05/99 22:22:00
Nero Version: 5.5.7.2
Recorder: < YAMAHA CRW8824S> Version: 1.00 - HA 0 TA 3 - 5.5.7.2
Adapter driver: < asc> HA 0
Drive buffer : 4096kB
Bus Type : default ( 0) -> SCSI
CD-ROM: < SONY CD-ROM CDU701> Version: 1.0r - HA 1 TA 0 - 5.5.7.2
Adapter driver: < ESDI_506
> HA 1
Bus Type : default ( 0) -> ATAPI
SONY CD-ROM CDU701 ( Target 0, E:): Autoinsert On, DMA Off, Disconnect ? , SyncDataXfer ?
YAMAHA CRW8824S ( Target 3, D:): Autoinsert On, DMA ? , Disconnect ? , SyncDataXfer ?
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 13631488 ( 0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 55MB ( 56772kB)
Free physical memory: 0MB ( 28kB)
Memory in use : 100 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default ( 0)
Wizard: Off

CD-ROM ( ISO)
26.7.2003

14:39:45 #1 Text 0 File Reader.cpp, Line 117
Reader running

14:39:45 #2 Text 0 File Writer.cpp, Line 127
Writer YAMAHA CRW8824S running

14:39:45 #3 ISO9660GEN -11 File geniso.cpp, Line 4307
First writeable address = 0 ( 0x00000000)

14:40:18 #4 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items ( original item values)
0: TRM_DATA_MODE1 ( CTransferItem)
2 indices, index0 ( 150) not provided
original CD pos #0 + 217610 ( 217610) = #217610/48:21.35
relocatable, CD pos for caching/writing not required/required, no patch infos

-------------------------------------------------
-------------

14:40:50 #5 Text 0 File DlgWaitCD.cpp, Line 194
Last possible write address on media: 337349 ( 74:59.74)
Last address to be written: 217612 ( 48:23.37)

14:40:52 #6 Text 0 File DlgWaitCD.cpp, Line 1331
Recorder: YAMAHA CRW8824S;
CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D1 00 C6, 2: 61 1A 41 ( LI 97:26.65), 3: 4B 00 00 ( LO 75:00.00)
Additional Info [hex] 1: 02 4C B0, 2: 4A C8 36, 3: 00 00 00 ( invalid)

14:40:55 #7 Text 0 File BurnCDUtil.h, Line 316
Can only write at 4x instead of 8x to current disc

14:40:55 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder YAMAHA CRW8824S for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC " ", FilePos 0 307200 445972480

14:40:55 #9 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.

14:40:55 #10 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items ( after recorder preparation)
0: TRM_DATA_MODE1 ( CTransferItem)
2 indices, index0 ( 150) not provided
original CD pos #0 + 217610 ( 217610) = #217610/48:21.35
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 217608 blocks [YAMAHA CRW8824S ]

-------------------------------------------------
-------------

14:40:55 #11 Phase 32 File dlgbrnst.cpp, Line 1436
Simulation started at 4x ( 600 KB/s)

14:40:55 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 ( relocatable, CD pos, no patch infos, orig at #0): write at #0

14:43:33 #13 SCSI -1064 File Cdrdrv.cpp, Line 1411
SCSI Exec, HA 0, TA 3, LUN 0, buffer 0x041B849C
Status: 0x04 ( 0x01, SCSI_ERR)
HA-Status 0x00 ( 0x00, OK)
TA-Status 0x02 ( 0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 ( KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x48 0xE6 0x00 0x00 0x1F 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x21 0x00

14:43:33 #14 mmc -1064 File Writer.cpp, Line 321
Invalid block address

14:43:33 #15 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

14:43:35 #16 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader

14:43:36 #17 CDR -201 File WriterStatus.cpp, Line 145
Invalid writestate

14:43:36 #18 TRANSFER -18 File WriterStatus.cpp, Line 145
Could not perform EndTrack

14:43:36 #19 Phase 34 File dlgbrnst.cpp, Line 1436
Simulation failed at 4x ( 600 KB/s)

14:43:37 #20 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

Existing drivers:
File ´IoSubSys\SCSI1HLP.VXD´: Ver=4.10.1998, size=19270 bytes, created 05/05/99 22:22:00
File ´IoSubsys\NEROCD95.VXD´: Ver=4, 5, 0, 12, size=37811 bytes, created 29/05/03 15:11:10
File ´IoSubsys\CDFS.VXD´: Ver=4.10.1998, size=59133 bytes, created 05/05/99 22:22:00
File ´IoSubsys\ESDI_506.PDR´: Ver=4.10.2222, size=24406 bytes, created 05/05/99 22:22:00
File ´..\System\Vmm32\Ios.vxd´: Ver=4.10.2222, size=69578 bytes, created 05/05/99 22:22:00
File ´IoSubsys\Disktsd.vxd´: Ver=4.10.2222, size=18809 bytes, created 05/05/99 22:22:00

svp j´ai besoin d´une aide urgente

Passionnant à lire, vraiment...
Et si tu nous donnais ta config ?

ma config??

. ..

. ..

Ta configuration, c´est-à-dire quel OS, ce qu´il y a dans ta machine, quel soft tu utilises pour graver...
Tu crois que l´on peut trouver une solution avec le peu d´infos que tu balances ?

je grave avec nero version 5.5.7.2
et j´ai win98

Mets à jour Nero et accessoirement flashe le firmware de ton graveur. Et oublie 98.

euh comprend pas " flashe le firmware de ton graveur."tu peux m´expliquer.
quand a changer win98 merci mais non.c´est pas que je le prefere au XP mais avec un disc dur de 4 Go si je mais le XP il ne me reste plus bcp de place

Il n´y a pas que Microsoft dans la vie, il y a aussi Linux.

Flasher un firmware, c´est comme flasher un bios.