j´ai reussit a overclocké mon athlon xp 2000+
en 2200+ 1.8ghz
sur le bios de ma carte MSI combo KM2M KM266
quand je monte a 1.9 Ghz le systeme deviens instable
Ya t´il autre moyen pour booster encore plus?

il doit trop chauffer...

Su tu as de la ram noname le probleme peut venir de la.La ram noname accepte tres mal l´overclock dans la majorité des cas.La Corsair(tres cher)Geil(cher)et la Kingston(abordable)sont tres stable pour l´overclocking.Tu peut les monter plus haut en frequence que la noname habituellement.

a 2200+ il chauffe a 52°
ce trouve que c´est normal
a 1.9ghz sur le bios je trouve 55°
mais je crois que ca chauffe encore plus au demarrage de windows

Ma memoire c´est SpekTek 2*256 PC2100
je ne sais pas si c´est de la bonne marque
c´est pas connu je crois

ou alors la memoire suis pas...

T´as essayé de changer le voltage?

c un palomino ?
si c le cas laisse tomber ca s overclocke trop mal . ..

Non ce n´est pas un palomino je crois
avant O/C
SiSoftware Sandra

Processor
Model : AMD Athlon(tm) XP 2000+
Co-Processor ( FPU) : Built-in
Speed : 1.67GHz
Model Number : 2000 ( estimated)
Performance Rating : PR2417 ( estimated)
Type : Standard
Package : Socket A PGA
Multiplier : 12.5x
Generation : 7 ( 7x86)
Name : Duron M8 & Athlon MP/XP ( Thoroughbred) 1.5-2.5G+ 1.5-1.65V
Revision/Stepping : 8 / 0 ( 0)
Stepping Mask : A0
Core Voltage Rating : 1.650V

Processor Cache(s)
Internal Data Cache : 64kB Synchronous Write-Back ( 2-way sectored, 64 byte line size)
Internal Instruction Cache : 64kB Synchronous Write-Back ( 2-way, 64 byte line size)
L2 On-board Cache : 256kB ECC Synchronous Write-Back ( 16-way, 64 byte line size)
L2 Cache Multiplier : 1/1x ( 1667MHz)

Host Interface(s)
Front Side Bus Speed : 2x 133MHz ( 266MHz data rate)

Upgradeability
Socket/Slot : Socket A
Upgrade Interface : ZIF Socket
Supported Speed(s) : 2.00GHz+

Environment Monitor 1
Model : Winbond W83697HF ISA
Version : 6.00
Mainboard Specific Support : No

Power Rating(s)
CPU Core Power : 59W ( estimated)
CPU Cooling System Thermal Resistance : 0.42C/W ( estimated)

Sensors
CPU Temperature : 53.0°C / 127.4°F
Auto Fan Speed Control : No
CPU Fan Speed : 3013rpm
CPU Voltage : 1.68V

Features
FPU - Co-Processor Built-in : Yes
VME - Virtual Mode Extensions : Yes
DE - Debugging Extension : Yes
PSE - Page Size Extension : Yes
TSC - Time Stamp Counter : Yes
MSR - Model Specific Registers : Yes
PAE - Physical Address Extension : Yes
MCE - Machine Check Exception : Yes
CX8 - Compare & Exchange Instruction : Yes
APIC - Local APIC Built-in : Yes
SEP - Fast System Call : Yes
MTRR - Memory Type Range Registers : Yes
PGE - Page Global Enable : Yes
MCA - Machine Check Architecture : Yes
CMOV - Conditional Move Instruction : Yes
PAT - Page Attribute Table : Yes
PSE36 - 36-bit Page Size Extension : Yes
PSN - Unique Serial Number : No
CLF - Cache Line Flush Support : No
DS - Debug Trace & EMON Store : No
ACPI - Software Clock Control : No
MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
SSE Technology : Yes
SSE2 Technology : No
SS - Self Snoop : No
HTT - Hyper-Threading Technology : No
TM - Thermal Monitor : No
SBF - Signal Break on FERR : No
IA-64 Technology : No
SSE3 Technology : No
MON - Monitor/MWait : No
DSCPL - CPL qualified Debug Store : No
TM2 - Thermal Monitor 2 : No
CID - Context ID : No
DAZ - Denormals Are Zero : No

c un thoroughbred mais en A0 c pas le top de l overclocking . ..
et depasse pas les 60° les thoroughbred sont plus fragil que les palomino

Apres O/C
SiSoftware Sandra

Processor
Model : AMD Athlon(tm) XP 2200+
Co-Processor ( FPU) : Built-in
Speed : 1.79GHz
Model Number : 2200 ( estimated)
Performance Rating : PR2588 ( estimated)
Type : Standard
Package : Socket A PGA
Multiplier : 12.5x
Generation : 7 ( 7x86)
Name : Duron M8 & Athlon MP/XP ( Thoroughbred) 1.5-2.5G+ 1.5-1.65V
Revision/Stepping : 8 / 0 ( 0)
Stepping Mask : A0
Core Voltage Rating : 1.650V

Processor Cache(s)
Internal Data Cache : 64kB Synchronous Write-Back ( 2-way sectored, 64 byte line size)
Internal Instruction Cache : 64kB Synchronous Write-Back ( 2-way, 64 byte line size)
L2 On-board Cache : 256kB ECC Synchronous Write-Back ( 16-way, 64 byte line size)
L2 Cache Multiplier : 1/1x ( 1785MHz)

Host Interface(s)
Front Side Bus Speed : 2x 143MHz ( 286MHz data rate)

Upgradeability
Socket/Slot : Socket A
Upgrade Interface : ZIF Socket
Supported Speed(s) : 2.00GHz+

Environment Monitor 1
Model : Winbond W83697HF ISA
Version : 6.00
Mainboard Specific Support : No

Power Rating(s)
CPU Core Power : 63W ( estimated)
CPU Cooling System Thermal Resistance : 0.38C/W ( estimated)

Sensors
CPU Temperature : 54.0°C / 129.2°F
Auto Fan Speed Control : No
CPU Fan Speed : 3013rpm
CPU Voltage : 1.68V

Features
FPU - Co-Processor Built-in : Yes
VME - Virtual Mode Extensions : Yes
DE - Debugging Extension : Yes
PSE - Page Size Extension : Yes
TSC - Time Stamp Counter : Yes
MSR - Model Specific Registers : Yes
PAE - Physical Address Extension : Yes
MCE - Machine Check Exception : Yes
CX8 - Compare & Exchange Instruction : Yes
APIC - Local APIC Built-in : Yes
SEP - Fast System Call : Yes
MTRR - Memory Type Range Registers : Yes
PGE - Page Global Enable : Yes
MCA - Machine Check Architecture : Yes
CMOV - Conditional Move Instruction : Yes
PAT - Page Attribute Table : Yes
PSE36 - 36-bit Page Size Extension : Yes
PSN - Unique Serial Number : No
CLF - Cache Line Flush Support : No
DS - Debug Trace & EMON Store : No
ACPI - Software Clock Control : No
MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
SSE Technology : Yes
SSE2 Technology : No
SS - Self Snoop : No
HTT - Hyper-Threading Technology : No
TM - Thermal Monitor : No
SBF - Signal Break on FERR : No
IA-64 Technology : No
SSE3 Technology : No
MON - Monitor/MWait : No
DSCPL - CPL qualified Debug Store : No
TM2 - Thermal Monitor 2 : No
CID - Context ID : No
DAZ - Denormals Are Zero : No

Extended Features
SYCR - Extended Fast System Call : Yes
EMMX - Extended MMX Technology : Yes
3DNow! Technology : Yes
Extended 3DNow! Technology : Yes
SMP - MP Capability : No
AA-64 Technology : No