C´est vaiment sympa de m´aider briaeros, mais ca ne marche toujours pas
Je te copie/colle les sorties des commandes.
[root@localhost eagle-usb]# eaglestat
eagle-usb status display
--------------------------------------------------
-----------
Driver version 1.9.6
USB Bus : 002 USB Device : 004 Dbg mask: 0x0
Ethernet Interface : eth1
MAC: 00:60:4c:10:35:8c
Tx Rate 0000000160 Rx Rate 0000000608 Crc 0000000000
FEC 0000000000 Margin 0000000020 Atten 0000000060 dB
VID-CPE 0000000000 VID-CO 0000000028 HEC 0000000000
VPI 0000000008 VCI 0000000035 Delin GOOD
Cells Rx 0000000088 Cells Tx 0000000174
Pkts Rx 0000000088 Pkts Tx 0000000133
OAM 0000000000 Bad VPI 0000000000 Bad CRC 0000000000
Oversiz. 0000000000
Modem is operational
[root@localhost eagle-usb]# eaglediag
Diagnostic ( v1.2 20040111) driver eagle-usb 20040410191630
- System Information
Linux localhost 2.4.22-10mdk #1 Thu Sep 18 12:30:58 CEST 2003 i686 unknown unkno wn GNU/Linux
Mandrake Linux release 9.2 ( FiveStar) for i586
Linux version 2.4.22-10mdk ( nplanel@no.mandrakesoft.com) ( gcc version 3.3.1 ( Man drake Linux 9.2 3.3.1-2mdk)) #1 Thu Sep 18 12:30:58 CEST 2003
gcc version 3.3.1 ( Mandrake Linux 9.2 3.3.1-2mdk)
- module loaded ? [ OK ]
- modem operational ? [ OK ]
- Config eagle : non degroupe Free 8 23 6
- pppd launched ? [ OK ]
- Service for connection [ OK ]
- ping IP ? [ KO ]
- test DNS resolution ? [ KO ]
Complete diagnostic has been saved on / var/log/eagle-usb/eagle_diag_200404101916 30.txt
Please keep only relevant data and remove personal informations.
[root@localhost eagle-usb]#
[root@localhost eagle-usb]# netstat -w
Connexions Internet actives ( sans serveurs)
Proto Recv-Q Send-Q Adresse locale Adresse distante Etat
[root@localhost eagle-usb]#
[root@localhost eagle-usb]# netstat -tulipe
Table d´interfaces noyau
eth0 Lien encap:Ethernet HWaddr 00:50:70:72:5A:8E
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:100
RX bytes:0 ( 0.0 b) TX bytes:0 ( 0.0 b)
Interruption:16 Adresse de base:0xec00
eth1 Lien encap:Ethernet HWaddr 00:60:4C:10:35:8C
inet adr:192.168.60.30 Bcast:192.168.60.255 Masque:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:103 errors:0 dropped:0 overruns:0 frame:0
TX packets:160 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:100
RX bytes:1618 ( 1.5 Kb) TX bytes:7733 ( 7.5 Kb)
lo Lien encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:281 errors:0 dropped:0 overruns:0 frame:0
TX packets:281 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:22050 ( 21.5 Kb) TX bytes:22050 ( 21.5 Kb)
Tu remarquera que netstat -w me dit que la connection est active...
Voyant ca , j´ai essayer www.google.fr avec Konqueror...rien à faire
J´espère aussi que c´est lisible sur le forum...