bon j'ai reussi a résoudre pas mal de touches..

1. telecharger
http://www.megaupload.com/?d=ZB220K3O

2. ouvrer le fichier xbox360cemu et remplacer les lignes suivantes
B=2 #button id; 0 to disable
A=1 #button id; 0 to disable
Y=4 #button id; 0 to disable
X=3 #button id; 0 to disable
Left Trigger=12 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Right Trigger=11 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Start=8 #button id; 0 to disable
Back=7 #button id; 0 to disable
Left Thumb=9 #button id; 0 to disable
Right Thumb=10 #button id; 0 to disable
Left Shoulder=5 #button id; 0 to disable
Right Shoulder=6 #button id; 0 to disable

enregistrer sous

4. faites le test avec Xiput
Vous allez vous apercevoir que j'ai corriger les boutons suivant; select,star y,x,a et lb et rb

il me manque le stick droit et lt et rt
bon cest deja sa

j'ai lancer le jeux, sa marche impecable

Petite mise a jour
j'ai corriger un bouton : le stick gauche enfoncé fonctionne

ouvrir xbox360cemu et remplacer
B=2 #button id; 0 to disable
A=1 #button id; 0 to disable
Y=4 #button id; 0 to disable
X=3 #button id; 0 to disable
Left Trigger=12 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Right Trigger=11 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Start=8 #button id; 0 to disable
Back=7 #button id; 0 to disable
Left Thumb=9 #button id; 0 to disable
Right Thumb=10 #button id; 0 to disable
Left Shoulder=5 #button id; 0 to disable
Right Shoulder=6 #button id; 0 to disable

Merci pour l'info panda. Je voulais savoir quelques petits trucs. Xinput doit être placer dans le dossier du jeu par la suite? Ces manips sont faites pour les manettes style ps2?

Je galère pas mal aussi pour faire fonctionner ma manette, je vais tenter de voir si je peux peaufiner tes réglages, mais c'est bien tendu...

j'ai esseye avec la manette xbox 360 sans fil , sa marche nickel

oui, pour que sa marche faut mettre les fichiers que vous avez dézipper (xinputemu3.zip) dans le dossier du jeux.Bien sur en modifiant le fichier xbox360cemu que j'ai citer

petite mise a jour le stick droit ( droite gauche ) fonctionne

Index=0 #controller index in game controllers list; 0 is first; -1 to ignore this pad
Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=-2 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=4 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=-3 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog x Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog X+ Button=0 #button id; 0 to disable
Left Analog X- Button=0 #button id; 0 to disable
Left Analog Y+ Button=0 #button id; 0 to disable
Left Analog Y- Button=0 #button id; 0 to disable
Right Analog X+ Button=0 #button id; 0 to disable
Right Analog X- Button=0 #button id; 0 to disable
Right Analog Y+ Button=0 #button id; 0 to disable
Right Analog Y- Button=0 #button id; 0 to disable
D-pad POV=1 #POV index; 0 to disable
D-pad Up=0 #button id; 0 to disable
D-pad Down=0 #button id; 0 to disable
D-pad Left=0 #button id; 0 to disable
D-pad Right=0 #button id; 0 to disable
B=2 #button id; 0 to disable
A=1 #button id; 0 to disable
Y=4 #button id; 0 to disable
X=3 #button id; 0 to disable
Left Trigger= #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Right Trigger= #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Start=8 #button id; 0 to disable
Back=7 #button id; 0 to disable
Left Thumb=9 #button id; 0 to disable
Right Thumb=10 #button id; 0 to disable
Left Shoulder=5 #button id; 0 to disable
Right Shoulder=6 #button id; 0 to disable

mise a jour le stick droit marche impeccable
remplacer tout le contenu Logitech Cordless Rumblepad 2 / Generic Rumble Controller
par

1. Logitech Cordless Rumblepad 2 / Generic Rumble Controller

[PAD1]
Index=0 #controller index in game controllers list; 0 is first; -1 to ignore this pad
Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=-2 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=4 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=-5 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog x Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog X+ Button=0 #button id; 0 to disable
Left Analog X- Button=0 #button id; 0 to disable
Left Analog Y+ Button=0 #button id; 0 to disable
Left Analog Y- Button=0 #button id; 0 to disable
Right Analog X+ Button=0 #button id; 0 to disable
Right Analog X- Button=0 #button id; 0 to disable
Right Analog Y+ Button=0 #button id; 0 to disable
Right Analog Y- Button=0 #button id; 0 to disable
D-pad POV=1 #POV index; 0 to disable
D-pad Up=0 #button id; 0 to disable
D-pad Down=0 #button id; 0 to disable
D-pad Left=0 #button id; 0 to disable
D-pad Right=0 #button id; 0 to disable
B=2 #button id; 0 to disable
A=1 #button id; 0 to disable
Y=4 #button id; 0 to disable
X=3 #button id; 0 to disable
Left Trigger= #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Right Trigger= #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Start=8 #button id; 0 to disable
Back=7 #button id; 0 to disable
Left Thumb=9 #button id; 0 to disable
Right Thumb=10 #button id; 0 to disable
Left Shoulder=5 #button id; 0 to disable
Right Shoulder=6 #button id; 0 to disable
UseForceFeedback=1 #use 0 to 1; default 0
ForceLargeGain=10000 #use 0 to 10000; default 10000; effect intensity
ForceLargePeriod=120000 #use 0 to 200000; default 120000; effect frequency; wheel only
ForceLargeFadeTime=10 #use 0 to 100; default 10
ForceLargeFadeIn=0 #use 0 to 1; default 1
ForceLargeFadeOut=0 #use 0 to 1; default 1
ForceLargeStartMag=0 #use 0 to 10000; default 2000; effect will begin with this value
ForceSmallGain=10000 #use 0 to 10000; default 10000; effect intensity
ForceSmallPeriod=30000 #use 0 to 200000; default 30000; effect frequency; wheel only
ForceSmallFadeTime=10 #use 0 to 100 default 10
ForceSmallFadeIn=0 #use 0 to 1; default 1
ForceSmallFadeOut=0 #use 0 to 1; default 1
ForceSmallStartMag=0 #use 0 to 10000; default 2000; effect will begin with this value
WheelInertiaGain=2500 #use 0 to 10000; default 2500; effect intensity; wheel only
WheelSpringGain=5000 #use 0 to 10000; default 5000; effect intensity; wheel only
SteeringWheel=0 #use 0 to 1; enable for all wheel effects

manque plus que 2 boutons LT et RT

je narrive pas a configurer ses deux bouton ( LT et RT ) cest les boutons 6 et 7, le probleme cest que les touches LB et RB sont aussi de touche 5 et 6....

sinon jai reussi a faire fonctionner la touche RT mais avec deux touches simultané...bof koi
si quelqun trouve , je suis preneur
sinon j esseyerai ce soir

désole cest bien les touche 5 et 6

oublié ce que je viens de dire

les touches LT et RT sont
Left Trigger= #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Right Trigger= #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1

faut juste marque une lettre apres =

Gros boulot panda!

J'aimerais savoir si quelqu'un pourrait me donner une config pour jouer avec une manette ps2 branché par usb sur le pc. J'ai essayé avec xpadder, mais y'a trop de boutons pour la config, si quelqu'un est au jus, merci de me le dire

benrootsa , as tu esseye xinputemu3 ? sa devrai fonctionner aussi avec la manette ps2

Yes, je viens d'essayer. Seul soucis, c'est qu'on peut pas contrôler la caméra, et que le bouton start fonctionne avec r1. M'enfin, c du boulot tout ça, chapeau

Voila la config qui fonctionne pour ma part (manette ps2 branché sur pc par usb). Y me manque que l'analogique droit, mais j'arrive pas a le configurer.

1. Logitech Cordless Rumblepad 2 / Generic Rumble Controller

[PAD1]
Index=0 #controller index in game controllers list; 0 is first; -1 to ignore this pad
Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=-2 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=4 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=-5 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog X+ Button=0 #button id; 0 to disable
Left Analog X- Button=0 #button id; 0 to disable
Left Analog Y+ Button=0 #button id; 0 to disable
Left Analog Y- Button=0 #button id; 0 to disable
Right Analog X+ Button=0 #button id; 0 to disable
Right Analog X- Button=0 #button id; 0 to disable
Right Analog Y+ Button=0 #button id; 0 to disable
Right Analog Y- Button=0 #button id; 0 to disable
D-pad POV=1 #POV index; 0 to disable
D-pad Up=0 #button id; 0 to disable
D-pad Down=0 #button id; 0 to disable
D-pad Left=0 #button id; 0 to disable
D-pad Right=0 #button id; 0 to disable
B=2 #button id; 0 to disable
A=3 #button id; 0 to disable
Y=1 #button id; 0 to disable
X=4 #button id; 0 to disable
Left Trigger=5 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Right Trigger=6 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Start=10 #button id; 0 to disable
Back=9 #button id; 0 to disable
Left Thumb=11 #button id; 0 to disable
Right Thumb=12 #button id; 0 to disable
Left Shoulder=7 #button id; 0 to disable
Right Shoulder=8 #button id; 0 to disable
UseForceFeedback=1 #use 0 to 1; default 0
ForceLargeGain=10000 #use 0 to 10000; default 10000; effect intensity
ForceLargePeriod=120000 #use 0 to 200000; default 120000; effect frequency; wheel only
ForceLargeFadeTime=10 #use 0 to 100; default 10
ForceLargeFadeIn=0 #use 0 to 1; default 1
ForceLargeFadeOut=0 #use 0 to 1; default 1
ForceLargeStartMag=0 #use 0 to 10000; default 2000; effect will begin with this value
ForceSmallGain=10000 #use 0 to 10000; default 10000; effect intensity
ForceSmallPeriod=30000 #use 0 to 200000; default 30000; effect frequency; wheel only
ForceSmallFadeTime=10 #use 0 to 100 default 10
ForceSmallFadeIn=0 #use 0 to 1; default 1
ForceSmallFadeOut=0 #use 0 to 1; default 1
ForceSmallStartMag=0 #use 0 to 10000; default 2000; effect will begin with this value
WheelInertiaGain=2500 #use 0 to 10000; default 2500; effect intensity; wheel only
WheelSpringGain=5000 #use 0 to 10000; default 5000; effect intensity; wheel only
SteeringWheel=0 #use 0 to 1; enable for all wheel effects

pour r1 c normal que sa se met en pause, sois par r1 ou par star sur la manette xbox

ta allumé les voyants de la manette pour le stick droit?

en 1er un grand merci a panda

mais je ne comprend pas comment faire fonctionner LT RT

ni l"explication suivante:

"les touches LT et RT sont
Left Trigger= #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Right Trigger= #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1

faut juste marque une lettre apres = " ( quelle lettre ?)
merci pour tout
osi

En fait, j'ai une vraie manette PS2, mais grâce à l'usb , je peux brancher deux manettes PS sur le PC. Je supposes que ça doit changer quelque chose ( http://ecx.images-amazon.com/images/I/41MwwtRf3nL._SL500_AA300_.jpg voila en gros ce que c'est). Donc c'est la galère, le stick droit fonctionne pas. Mais tous le reste marche nickel.

osirisdj justement jy reflechie pour les touches LT et RT,jai une bonne nouvelle
mise a jour touche Lb fonctionnelle

Mise a jour, touche LT fonctionnel
divers bug mineur corrigé

Index=0
Left Analog X=1
Left Analog Y=-2
Right Analog X=4
Right Analog Y=-5
Left Analog y Linear=0
Left Analog x Linear=0
Right Analog X Linear=0
Right Analog Y Linear=0
Left Analog X+ Button=0
Left Analog X- Button=0
Left Analog Y+ Button=0
Left Analog Y- Button=0
Right Analog X+ Button=0
Right Analog X- Button=0
Right Analog Y+ Button=0
Right Analog Y- Button=0
D-pad POV=1
D-pad Up=0
D-pad Down=0
D-pad Left=0
D-pad Right=0
B=2
A=1
Y=4
X=3
Left Trigger=s-5
Right Trigger=a-4
Start=8
Back=7
Left Thumb=9
Right Thumb=10
Left Shoulder=5
Right Shoulder=6

ne copier pas encore ce que jai marké il est bugé voir marche pas

oui sory pour la precipitation .... j avais pas compris !
a force de lire et relire je m embrouille !

donc apres avoit copier coller les scripts j arrivais au meme resultat que toi sur ma sans fil xb360 cad: tout sauf le LT RT

et je me demandai si il n'y avait pas pas doublon pour le rb nb car le fait de pouser sur une seul touche declanchait une fonction a plusieurs touches (celui ou on demande au debut lb+rt)

merci pour tous le boulot !! car je n arrive meme pas a jouer avec le clavier meme apres une reinstale propre sans les drivers manette .... et le service techique ne repond pas et plus apres 20h

je vous redonne les scripts si vous avez des soucis
teste avec ma manette xbox 360 , marche nickel sauf touche LT et RT
y a des bug sur ses touches , jesseyerai de corriger + tard

[Options]
UseAutoPad=0 #use 0 to 1; automatically make other PAD to PAD1 after detecting movement
UseInitBeep=1 #use 0 to 1; default 1; beep on init

1. Logitech Cordless Rumblepad 2 / Generic Rumble Controller

[PAD1]
Index=0 #controller index in game controllers list; 0 is first; -1 to ignore this pad
Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=-2 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=4 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=-5 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog X+ Button=0 #button id; 0 to disable
Left Analog X- Button=0 #button id; 0 to disable
Left Analog Y+ Button=0 #button id; 0 to disable
Left Analog Y- Button=0 #button id; 0 to disable
Right Analog X+ Button=0 #button id; 0 to disable
Right Analog X- Button=0 #button id; 0 to disable
Right Analog Y+ Button=0 #button id; 0 to disable
Right Analog Y- Button=0 #button id; 0 to disable
D-pad POV=1 #POV index; 0 to disable
D-pad Up=0 #button id; 0 to disable
D-pad Down=0 #button id; 0 to disable
D-pad Left=0 #button id; 0 to disable
D-pad Right=0 #button id; 0 to disable
B=2 #button id; 0 to disable
A=1 #button id; 0 to disable
Y=4 #button id; 0 to disable
X=3 #button id; 0 to disable
Left Trigger=5 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Right Trigger=6 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Start=8 #button id; 0 to disable
Back=7 #button id; 0 to disable
Left Thumb=9 #button id; 0 to disable
Right Thumb=10 #button id; 0 to disable
Left Shoulder=5 #button id; 0 to disable
Right Shoulder=6 #button id; 0 to disable
UseForceFeedback=1 #use 0 to 1; default 0
ForceLargeGain=10000 #use 0 to 10000; default 10000; effect intensity
ForceLargePeriod=120000 #use 0 to 200000; default 120000; effect frequency; wheel only
ForceLargeFadeTime=10 #use 0 to 100; default 10
ForceLargeFadeIn=0 #use 0 to 1; default 1
ForceLargeFadeOut=0 #use 0 to 1; default 1
ForceLargeStartMag=0 #use 0 to 10000; default 2000; effect will begin with this value
ForceSmallGain=10000 #use 0 to 10000; default 10000; effect intensity
ForceSmallPeriod=30000 #use 0 to 200000; default 30000; effect frequency; wheel only
ForceSmallFadeTime=10 #use 0 to 100 default 10
ForceSmallFadeIn=0 #use 0 to 1; default 1
ForceSmallFadeOut=0 #use 0 to 1; default 1
ForceSmallStartMag=0 #use 0 to 10000; default 2000; effect will begin with this value
WheelInertiaGain=2500 #use 0 to 10000; default 2500; effect intensity; wheel only
WheelSpringGain=5000 #use 0 to 10000; default 5000; effect intensity; wheel only
SteeringWheel=0 #use 0 to 1; enable for all wheel effects

coool c'est jouable enfet dans ce dernier script on dirais que LT RT sont en bis avec LB RB, je m explique pour utiliser LT je press lb et j ai le meme resultat ! meme si la touche guarde apparament sa fonction d'origine ... bref un grand MERCI a panda qui me permet de jouer un peu en attandant la version definitive !!