Bonjour j'ai un problème avec ma manette logitech rumblepad 2 lorsque je veux sélectionner un gadget je peux selectionner que ceux de droite a gauche et de haut en bas pas ceux qui sont entre les 4 sois entre gauche et bas droite et bas ainsi de suite c est embêtant de devoir aller sur le clavier en pleine action merci pour votre aide

up nom de zeus

Salut,

regarde les sujet traitant des problème de manettes, car il y a certains fichiers à remplacer et/ou renommer pour jouer tranquillement avec une manette autre que celle de la 360, et je trouve ça franchement dégeulasse :@

je te remercie j'ai regardé aucun ne traite sur mon problème j'ai donc mis l'autre solution avec xbox360cemu ca fonctionne mais j'ai de nouveau le problème d'inversion stick analogique gauche c 'est lourd je test de combi mais ca marche pas donc j'attends qu'une personne veule bien bien me donner la copie de son bloc note xbox360cemu modifié pour que tout marche enfin... c'est vrai que j'ai jamais eu d'autre problème avec ma manette avec les autres jeux a par Batman meme GTA IV fonctionne nickel

up dsl il doit bien avoir un joueur avec le bon fichier bloc note j attend suis patient et merci

J'aurais souhaiter jouer ce soir mais bon je patienterai

Pour moi ca marche:

[Options]
UseAutoPad=0 #use 0 to 1; automatically make other PAD to PAD1 after detecting movement
UseInitBeep=0 #use 0 to 1; default 1; beep on init

1. Logitech Cordless Rumblepad 2 / Generic Rumble Controller

[PAD1]
Index=0 #controller index in game controllers list; 0 is first; -1 to ignore this pad
Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=-2 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=6 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=-3 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog X+ Button=0 #button id; 0 to disable
Left Analog X- Button=0 #button id; 0 to disable
Left Analog Y+ Button=0 #button id; 0 to disable
Left Analog Y- Button=0 #button id; 0 to disable
Right Analog X+ Button=0 #button id; 0 to disable
Right Analog X- Button=0 #button id; 0 to disable
Right Analog Y+ Button=0 #button id; 0 to disable
Right Analog Y- Button=0 #button id; 0 to disable
D-pad POV=1 #POV index; 0 to disable
D-pad Up=0 #button id; 0 to disable
D-pad Down=0 #button id; 0 to disable
D-pad Left=0 #button id; 0 to disable
D-pad Right=0 #button id; 0 to disable
A=3 #button id; 0 to disable
B=2 #button id; 0 to disable
X=4 #button id; 0 to disable
Y=1 #button id; 0 to disable
Left Shoulder=5 #button id; 0 to disable
Right Shoulder=6 #button id; 0 to disable
Back=9 #button id; 0 to disable
Start=10 #button id; 0 to disable
Left Thumb=11 #button id; 0 to disable
Right Thumb=12 #button id; 0 to disable
Left Trigger=7 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Right Trigger=8 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
UseForceFeedback=1 #use 0 to 1; default 0
ForceLargeGain=10000 #use 0 to 10000; default 10000; effect intensity
ForceLargePeriod=120000 #use 0 to 200000; default 120000; effect frequency; wheel only
ForceLargeFadeTime=10 #use 0 to 100; default 10
ForceLargeFadeIn=0 #use 0 to 1; default 1
ForceLargeFadeOut=0 #use 0 to 1; default 1
ForceLargeStartMag=0 #use 0 to 10000; default 2000; effect will begin with this value
ForceSmallGain=10000 #use 0 to 10000; default 10000; effect intensity
ForceSmallPeriod=30000 #use 0 to 200000; default 30000; effect frequency; wheel only
ForceSmallFadeTime=10 #use 0 to 100 default 10
ForceSmallFadeIn=0 #use 0 to 1; default 1
ForceSmallFadeOut=0 #use 0 to 1; default 1
ForceSmallStartMag=0 #use 0 to 10000; default 2000; effect will begin with this value
WheelInertiaGain=2500 #use 0 to 10000; default 2500; effect intensity; wheel only
WheelSpringGain=5000 #use 0 to 10000; default 5000; effect intensity; wheel only
SteeringWheel=0 #use 0 to 1; enable for all wheel effects

1. Logitech G25 Racing Wheel / Generic Wheel

[PAD2]
Index=-1 #controller index in game controllers list; 0 is first; -1 to ignore this pad
Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=7 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=7 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=7 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog X Linear=30 #-100 to +100 raise this number to increase sensitivity near center
Left Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog X+ Button=0 #button id; 0 to disable
Left Analog X- Button=0 #button id; 0 to disable
Left Analog Y+ Button=0 #button id; 0 to disable
Left Analog Y- Button=0 #button id; 0 to disable
Right Analog X+ Button=0 #button id; 0 to disable
Right Analog X- Button=0 #button id; 0 to disable
Right Analog Y+ Button=0 #button id; 0 to disable
Right Analog Y- Button=0 #button id; 0 to disable
D-pad POV=1 #POV index; 0 to disable
D-pad Up=0 #button id; 0 to disable
D-pad Down=0 #button id; 0 to disable
D-pad Left=0 #button id; 0 to disable
D-pad Right=0 #button id; 0 to disable
A=18 #button id; 0 to disable
B=19 #button id; 0 to disable
X=17 #button id; 0 to disable
Y=16 #button id; 0 to disable
Left Shoulder=6 #button id; 0 to disable
Right Shoulder=5 #button id; 0 to disable
Back=8 #button id; 0 to disable
Start=7 #button id; 0 to disable
Left Thumb=3 #button id; 0 to disable
Right Thumb=4 #button id; 0 to disable
Left Trigger=a-6 #button id; precede with 'a' for an axis; eg; a-6; precede with 's' for a slider eg; s-1
Right Trigger=a-2 #button id; precede with 'a' for an axis; eg; a-6; precede with 's' for a slider eg; s-1
UseForceFeedback=1 #use 0 to 1; default 0
ForceLargeGain=8000 #use 0 to 10000; default 10000; effect intensity
ForceLargePeriod=120000 #use 0 to 200000; default 120000; effect frequency; wheel only
ForceLargeFadeTime=10 #use 0 to 100; default 10
ForceLargeFadeIn=0 #use 0 to 1; default 1
ForceLargeFadeOut=1 #use 0 to 1; default 1
ForceLargeStartMag=1000 #use 0 to 10000; default 2000; effect will begin with this value and end with 10000
ForceSmallGain=8000 #use 0 to 10000; default 10000; effect intensity
ForceSmallPeriod=30000 #use 0 to 200000; default 30000; effect frequency; wheel only
ForceSmallFadeTime=10 #use 0 to 100; default 10
ForceSmallFadeIn=0 #use 0 to 1; default 1
ForceSmallFadeOut=1 #use 0 to 1; default 1
ForceSmallStartMag=1000 #use 0 to 10000; default 2000; effect will begin with this value and end with 10000
WheelInertiaGain=2500 #use 0 to 10000; default 2500; effect intensity; wheel only
WheelSpringGain=5000 #use 0 to 10000; default 5000; effect intensity; wheel only
SteeringWheel=1 #use 0 to 1; enable for all wheel effects

just_here je te remercie mais tu m'a donner le même que d origine j'ai toujours la direction inverser sauf que la croix directionnel me permet de sélectionner tte les armes sans passer par le clavier... j attend j attend

[Options]
UseAutoPad=0 #use 0 to 1; automatically make other PAD to PAD1 after detecting movement
UseInitBeep=1 #use 0 to 1; default 1; beep on init

1. Logitech Cordless Rumblepad 2 / Generic Rumble Controller

[PAD1]
Index=0 #controller index in game controllers list; 0 is first; -1 to ignore this pad
Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=-2 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=6 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=-3 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog X+ Button=0 #button id; 0 to disable
Left Analog X- Button=0 #button id; 0 to disable
Left Analog Y+ Button=0 #button id; 0 to disable
Left Analog Y- Button=0 #button id; 0 to disable
Right Analog X+ Button=0 #button id; 0 to disable
Right Analog X- Button=0 #button id; 0 to disable
Right Analog Y+ Button=0 #button id; 0 to disable
Right Analog Y- Button=0 #button id; 0 to disable
D-pad POV=1 #POV index; 0 to disable
D-pad Up=0 #button id; 0 to disable
D-pad Down=0 #button id; 0 to disable
D-pad Left=0 #button id; 0 to disable
D-pad Right=0 #button id; 0 to disable
A=3 #button id; 0 to disable
B=2 #button id; 0 to disable
X=4 #button id; 0 to disable
Y=1 #button id; 0 to disable
Left Shoulder=7 #button id; 0 to disable
Right Shoulder=8 #button id; 0 to disable
Back=9 #button id; 0 to disable
Start=10 #button id; 0 to disable
Left Thumb=11 #button id; 0 to disable
Right Thumb=12 #button id; 0 to disable
Left Trigger=5 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Right Trigger=6 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
UseForceFeedback=1 #use 0 to 1; default 0
ForceLargeGain=10000 #use 0 to 10000; default 10000; effect intensity
ForceLargePeriod=120000 #use 0 to 200000; default 120000; effect frequency; wheel only
ForceLargeFadeTime=10 #use 0 to 100; default 10
ForceLargeFadeIn=0 #use 0 to 1; default 1
ForceLargeFadeOut=0 #use 0 to 1; default 1
ForceLargeStartMag=0 #use 0 to 10000; default 2000; effect will begin with this value
ForceSmallGain=10000 #use 0 to 10000; default 10000; effect intensity
ForceSmallPeriod=30000 #use 0 to 200000; default 30000; effect frequency; wheel only
ForceSmallFadeTime=10 #use 0 to 100 default 10
ForceSmallFadeIn=0 #use 0 to 1; default 1
ForceSmallFadeOut=0 #use 0 to 1; default 1
ForceSmallStartMag=0 #use 0 to 10000; default 2000; effect will begin with this value
WheelInertiaGain=2500 #use 0 to 10000; default 2500; effect intensity; wheel only
WheelSpringGain=5000 #use 0 to 10000; default 5000; effect intensity; wheel only
SteeringWheel=0 #use 0 to 1; enable for all wheel effects

1. Logitech G25 Racing Wheel / Generic Wheel

[PAD2]
Index=-1 #controller index in game controllers list; 0 is first; -1 to ignore this pad
Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=7 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=7 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=7 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog X Linear=30 #-100 to +100 raise this number to increase sensitivity near center
Left Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog X+ Button=0 #button id; 0 to disable
Left Analog X- Button=0 #button id; 0 to disable
Left Analog Y+ Button=0 #button id; 0 to disable
Left Analog Y- Button=0 #button id; 0 to disable
Right Analog X+ Button=0 #button id; 0 to disable
Right Analog X- Button=0 #button id; 0 to disable
Right Analog Y+ Button=0 #button id; 0 to disable
Right Analog Y- Button=0 #button id; 0 to disable
D-pad POV=1 #POV index; 0 to disable
D-pad Up=0 #button id; 0 to disable
D-pad Down=0 #button id; 0 to disable
D-pad Left=0 #button id; 0 to disable
D-pad Right=0 #button id; 0 to disable
A=18 #button id; 0 to disable
B=19 #button id; 0 to disable
X=17 #button id; 0 to disable
Y=16 #button id; 0 to disable
Left Shoulder=6 #button id; 0 to disable
Right Shoulder=5 #button id; 0 to disable
Back=8 #button id; 0 to disable
Start=7 #button id; 0 to disable
Left Thumb=3 #button id; 0 to disable
Right Thumb=4 #button id; 0 to disable
Left Trigger=a-6 #button id; precede with 'a' for an axis; eg; a-6; precede with 's' for a slider eg; s-1
Right Trigger=a-2 #button id; precede with 'a' for an axis; eg; a-6; precede with 's' for a slider eg; s-1
UseForceFeedback=1 #use 0 to 1; default 0
ForceLargeGain=8000 #use 0 to 10000; default 10000; effect intensity
ForceLargePeriod=120000 #use 0 to 200000; default 120000; effect frequency; wheel only
ForceLargeFadeTime=10 #use 0 to 100; default 10
ForceLargeFadeIn=0 #use 0 to 1; default 1
ForceLargeFadeOut=1 #use 0 to 1; default 1
ForceLargeStartMag=1000 #use 0 to 10000; default 2000; effect will begin with this value and end with 10000
ForceSmallGain=8000 #use 0 to 10000; default 10000; effect intensity
ForceSmallPeriod=30000 #use 0 to 200000; default 30000; effect frequency; wheel only
ForceSmallFadeTime=10 #use 0 to 100; default 10
ForceSmallFadeIn=0 #use 0 to 1; default 1
ForceSmallFadeOut=1 #use 0 to 1; default 1
ForceSmallStartMag=1000 #use 0 to 10000; default 2000; effect will begin with this value and end with 10000
WheelInertiaGain=2500 #use 0 to 10000; default 2500; effect intensity; wheel only
WheelSpringGain=5000 #use 0 to 10000; default 5000; effect intensity; wheel only
SteeringWheel=1 #use 0 to 1; enable for all wheel effects

je signal que j'ai deja fais une modif au fichier DefaultInput donc je sais pas si ca créer un incident avec xbox360cemu dsl d'être chiant et encore merci pour vos aides

Non, ca ne crée pas d'incident à moins que tu ais modifié une valeur essentielle qui n'a aucun sens mais sinon ca n'affecte pas le programme. D'ailleurs le fichier que je t'ai mis n'est pas celui que j'ai trouvé d'origine, c'est celui que j'ai du modifié pour inverser les axes du stick droit et les bouton A B X Y d'ou mon étonnement! Je sais que ca ne va pas te mener bien loin mais essaie de faire comme moi: je modifiais ligne par ligne en vérifiant à chaque fois avec XInputTest pour voir à quoi je touchais jusqu'à ce que j'ai obtenu la configuration parfaite!
Sinon voila ce que j'avais dans le xbox360cemu d'origine, essaie le dans ce cas:

[Options]
UseAutoPad=0 #use 0 to 1; automatically make other PAD to PAD1 after detecting movement
UseInitBeep=1 #use 0 to 1; default 1; beep on init

1. Logitech Cordless Rumblepad 2 / Generic Rumble Controller

[PAD1]
Index=0 #controller index in game controllers list; 0 is first; -1 to ignore this pad
Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=-2 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=3 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=-6 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog X+ Button=0 #button id; 0 to disable
Left Analog X- Button=0 #button id; 0 to disable
Left Analog Y+ Button=0 #button id; 0 to disable
Left Analog Y- Button=0 #button id; 0 to disable
Right Analog X+ Button=0 #button id; 0 to disable
Right Analog X- Button=0 #button id; 0 to disable
Right Analog Y+ Button=0 #button id; 0 to disable
Right Analog Y- Button=0 #button id; 0 to disable
D-pad POV=1 #POV index; 0 to disable
D-pad Up=0 #button id; 0 to disable
D-pad Down=0 #button id; 0 to disable
D-pad Left=0 #button id; 0 to disable
D-pad Right=0 #button id; 0 to disable
A=2 #button id; 0 to disable
B=3 #button id; 0 to disable
X=1 #button id; 0 to disable
Y=4 #button id; 0 to disable
Left Shoulder=5 #button id; 0 to disable
Right Shoulder=6 #button id; 0 to disable
Back=9 #button id; 0 to disable
Start=10 #button id; 0 to disable
Left Thumb=11 #button id; 0 to disable
Right Thumb=12 #button id; 0 to disable
Left Trigger=7 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
Right Trigger=8 #button id; precede with 'a' for an axis; eg; a-6; for a slider precede with 's' eg; s-1
UseForceFeedback=1 #use 0 to 1; default 0
ForceLargeGain=10000 #use 0 to 10000; default 10000; effect intensity
ForceLargePeriod=120000 #use 0 to 200000; default 120000; effect frequency; wheel only
ForceLargeFadeTime=10 #use 0 to 100; default 10
ForceLargeFadeIn=0 #use 0 to 1; default 1
ForceLargeFadeOut=0 #use 0 to 1; default 1
ForceLargeStartMag=0 #use 0 to 10000; default 2000; effect will begin with this value
ForceSmallGain=10000 #use 0 to 10000; default 10000; effect intensity
ForceSmallPeriod=30000 #use 0 to 200000; default 30000; effect frequency; wheel only
ForceSmallFadeTime=10 #use 0 to 100 default 10
ForceSmallFadeIn=0 #use 0 to 1; default 1
ForceSmallFadeOut=0 #use 0 to 1; default 1
ForceSmallStartMag=0 #use 0 to 10000; default 2000; effect will begin with this value
WheelInertiaGain=2500 #use 0 to 10000; default 2500; effect intensity; wheel only
WheelSpringGain=5000 #use 0 to 10000; default 5000; effect intensity; wheel only
SteeringWheel=0 #use 0 to 1; enable for all wheel effects

1. Logitech G25 Racing Wheel / Generic Wheel

[PAD2]
Index=-1 #controller index in game controllers list; 0 is first; -1 to ignore this pad
Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=7 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=7 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=7 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog X Linear=30 #-100 to +100 raise this number to increase sensitivity near center
Left Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog X Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Right Analog Y Linear=0 #-100 to +100 raise this number to increase sensitivity near center
Left Analog X+ Button=0 #button id; 0 to disable
Left Analog X- Button=0 #button id; 0 to disable
Left Analog Y+ Button=0 #button id; 0 to disable
Left Analog Y- Button=0 #button id; 0 to disable
Right Analog X+ Button=0 #button id; 0 to disable
Right Analog X- Button=0 #button id; 0 to disable
Right Analog Y+ Button=0 #button id; 0 to disable
Right Analog Y- Button=0 #button id; 0 to disable
D-pad POV=1 #POV index; 0 to disable
D-pad Up=0 #button id; 0 to disable
D-pad Down=0 #button id; 0 to disable
D-pad Left=0 #button id; 0 to disable
D-pad Right=0 #button id; 0 to disable
A=18 #button id; 0 to disable
B=19 #button id; 0 to disable
X=17 #button id; 0 to disable
Y=16 #button id; 0 to disable
Left Shoulder=6 #button id; 0 to disable
Right Shoulder=5 #button id; 0 to disable
Back=8 #button id; 0 to disable
Start=7 #button id; 0 to disable
Left Thumb=3 #button id; 0 to disable
Right Thumb=4 #button id; 0 to disable
Left Trigger=a-6 #button id; precede with 'a' for an axis; eg; a-6; precede with 's' for a slider eg; s-1
Right Trigger=a-2 #button id; precede with 'a' for an axis; eg; a-6; precede with 's' for a slider eg; s-1
UseForceFeedback=1 #use 0 to 1; default 0
ForceLargeGain=8000 #use 0 to 10000; default 10000; effect intensity
ForceLargePeriod=120000 #use 0 to 200000; default 120000; effect frequency; wheel only
ForceLargeFadeTime=10 #use 0 to 100; default 10
ForceLargeFadeIn=0 #use 0 to 1; default 1
ForceLargeFadeOut=1 #use 0 to 1; default 1
ForceLargeStartMag=1000 #use 0 to 10000; default 2000; effect will begin with this value and end with 10000
ForceSmallGain=8000 #use 0 to 10000; default 10000; effect intensity
ForceSmallPeriod=30000 #use 0 to 200000; default 30000; effect frequency; wheel only
ForceSmallFadeTime=10 #use 0 to 100; default 10
ForceSmallFadeIn=0 #use 0 to 1; default 1
ForceSmallFadeOut=1 #use 0 to 1; default 1
ForceSmallStartMag=1000 #use 0 to 10000; default 2000; effect will begin with this value and end with 10000
WheelInertiaGain=2500 #use 0 to 10000; default 2500; effect intensity; wheel only
WheelSpringGain=5000 #use 0 to 10000; default 5000; effect intensity; wheel only
SteeringWheel=1 #use 0 to 1; enable for all wheel effects

resalut j'ai donc fais le xinputtest ben ca marche correct c est dans le jeu que tout est inversé apres j 'ai comparé les valeurs de ton fichier xbox360cmenu avec le mien ben dsl ca ne change pas genre ces lignes la:

Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=-2 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=3 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=-6 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable

mais par contre c est vrai que les bouton ont changé y x b a merci pour cela

C est juste la driection haut et bas qui sont inversé le reste est nickel plus que ca est c est bon

Left Analog X=1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=-2 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=3 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=-6 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable

j'ai changé donc comme toi mais ca marche tjrs pas c est inversé c est lourd..........

Vraiment je sais pas quoi faire pour t'aider...J'ai eu ca au départ, haut et bas inversé mais avec le 1er xbox360cemu que j'ai mis tout est rentré dans l'ordre... Si les lignes:
Right Analog X=3
Right Analog X=-6
et
Right Analog X=6
Right Analog X=-3
non rien modifié, je sais pas quoi te dire mais as tu essayé d'inverser les axes une fois dans le jeu?
Sinon essai toutes le combinaisons possibles avec x=-3 et x=6 etc...

ok vais test je te remercie sincèrement pour le temps que tu m'as donner je suis degouté car quand je fais la manip dans directinput presque tt marche sauf la selection des armes qui m empêche de prendre les gadjet entre deux directions suis obliger de passer par le clavier la dure lois de l emmerdement....

Je viens de reinstaller le jeux bahh ca marche toujours pas je teste les combines que tu m as donner

Salut, quels sont les fichiers que tu as avec XInput?
xbox360cemu.ini
xinput1_3.dll
xinput9_1_0.dll
XInputTest.exe
mais surtout dinput8.dll car il arrête la recherche de manette et force le jeux à utiliser la config XInput.

Entre temps je vais voir sur les forums anglais si quelqu'un a le même problème que toi

ben la j ai pas le jeux sous la main mais je te redis.... apres

ok, en tout cas vérifie bien si tu as le dinput8.dll
Sinon voila 2 autres solutions:
http://rapidshare.com/files/278018504/PadFix_Batman_Ark.rar

http://www.tocaedit.com/IB/index.php?automodule=downloads&showfile=44

Tiens moi au courant, je repasserai dans une heure

Et un gros merci t es sympa vraiment de m'aider