pas moi en tout cas

comme personne ne m´a répondu
j´en conclus que personne ne l´acheté
c´est une bonne nouvelle ! !!

Moi je l´ai acheté!!!

moi oci mé je ne l´ai pas trouvé super ! !!!!

Moi aussi

Glover tu es un allié formidable!

a...
c´est marrant ceux qui critiquent tout le monde. Moi j´ai acheté le jeu, et je dois dire qu´il m´a beaucoup plu!

Ceux qui viennent critiquer les autres ne sont-ils pas stupides, pour ne pas dire autre chose? Pourquoi tant qu´on y est ne pas allez sur le forum de Metroid Prime et les traiter de mongols puisque le jeu est violent? ( hors qu´il est un très bon jeu!! Je ne le conteste pas, c´est juste un exemple d´idiotie humaine...)

Bravo eminemjul je suis totalement d accord avec toi ! !!!

bravo super cretin tu a defendu le jeu plu nul o monde !! !

kell effet sa fait d etre ossi bete ?

vive poulpi ki a compri la menace grandissante de se jeu laveur de cerveau !! !!!

léa tu peux menvoyer une photo de toi stp

vive glover et supermerde !! !!!!
vous avez raison ce jeu est super, vous controlez un gant, vous savez que vous pouvez faire la même chose chez vous ? et oui vous prenez un gant et un ballon et voila vous jouez a glover en 3d si c´est pas magnifique !! !

poulpy nest pa de remord on aura essaye de les sauve mai je croi ke leur cerveau a ete iradie par les ondes de glover c pauvre brebis egare n ont plu toute leur tete paix a leure ames .......

Moi j´ai le jeu mais le fait n´est pas là...
Je trouve bête que certaines personnes ailles
sur des forums de jeux qu´ils aiment pas et critiquent moi si j´aime pas un jeu je fais tout
pour l´éviter

Mais c'est pas possible d'être aussi con, poulpi66 !

nique ta mér et écoute;)
ce jeu est trop bien
CHACUN CES GOUTS

Nouveau forum La brute faite passé le message : https://www.jeuxvideo.com/forums/0-18298-0-1-0-1-0-0.htm

#

1. /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
2. To really apply changes reload proftpd after modifications.

#

1. Includes DSO modules

Include /etc/proftpd/modules.conf

1. Set off to disable IPv6 support which is annoying on IPv4 only boxes.

UseIPv6 on

ServerName "Ftp Btsig 1"
ServerType standalone
DeferWelcome off

MultilineRFC2228 on
DefaultServer on
ShowSymlinks on

TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200

DisplayLogin welcome.msg
DisplayChdir .message true
ListOptions "-l"

DenyFilter \*.*/

1. Use this to jail all users in their homes
2. DefaultRoot ~

1. Users require a valid shell listed in /etc/shells to login.
2. Use this directive to release that constrain.
3. RequireValidShell off

1. Port 21 is the standard FTP port.

Port 21

1. In some cases you have to specify passive ports range to by-pass
2. firewall limitations. Ephemeral ports can be used for that, but
3. feel free to use a more narrow range.
4. PassivePorts 49152 65534

1. If your host was NATted, this option is useful in order to
2. allow passive tranfers to work. You have to use your public
3. address and opening the passive ports used on your firewall as well.
4. MasqueradeAddress 1.2.3.4

1. To prevent DoS attacks, set the maximum number of child processes
2. to 30. If you need to allow more than 30 concurrent connections
3. at once, simply increase this value. Note that this ONLY works
4. in standalone mode, in inetd mode you should use an inetd server
5. that allows you to limit maximum number of processes per service
6. (such as xinetd)

MaxInstances 30

1. Set the user and group that the server normally runs at.

User proftpd
Group nogroup

1. Umask 022 is a good standard umask to prevent new files and dirs
2. (second parm) from being group and world writable.

Umask 022 022

1. Normally, we want files to be overwriteable.

AllowOverwrite on

1. Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
2. PersistentPasswd off

1. This is required to use both PAM-based authentication and local passwords
2. AuthOrder *mod_auth_pam.c mod_auth_unix.c

1. Be warned: use of this directive impacts CPU average load!
2. Uncomment this if you like to see progress and transfer rate with ftpwho
3. in downloads. That is not needed for uploads rates.

#

1. UseSendFile off

1. Choose a SQL backend among MySQL or PostgreSQL.
2. Both modules are loaded in default configuration, so you have to specify the backend
3. or comment out the unused module in /etc/proftpd/modules.conf.
4. Use 'mysql' or 'postgres' as possible values.

#

1. <IfModule mod_sql.c>
2. SQLBackend mysql
3. </IfModule>

TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log

<IfModule mod_quotatab.c>
QuotaEngine off
</IfModule>

<IfModule mod_ratio.c>
Ratios off
</IfModule>

1. Delay engine reduces impact of the so-called Timing Attack described in
2. http://security.lss.hr/index.php?page=details&amp;ID=LSS-2004-10-02
3. It is on by default.

<IfModule mod_delay.c>
DelayEngine on
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine off
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>

#

1. Alternative authentication frameworks

#

1. Include /etc/proftpd/ldap.conf
2. Include /etc/proftpd/sql.conf

#

1. This is used for FTPS connections

#

1. Include /etc/proftpd/tls.conf

1. A basic anonymous configuration, no upload directories.

<Anonymous ~ftp>
User ftp
Group nogroup

1. # We want clients to be able to login with "anonymous" as well as "ftp"

UserAlias anonymous ftp

1. # Cosmetic changes, all files belongs to ftp user

DirFakeUser on ftp
DirFakeGroup on ftp

#

RequireValidShell off

#

1. # Limit the maximum number of anonymous logins

MaxClients 10

#

1. # We want 'welcome.msg' displayed at login, and '.message' displayed
2. # in each newly chdired directory.

DisplayLogin welcome.msg
DisplayFirstChdir .message

#

1. # Limit WRITE everywhere in the anonymous chroot

<Directory *>
<Limit WRITE>
DenyAll
</Limit>
</Directory>

#

1. # Uncomment this if you're brave.
2. # <Directory incoming>
3. # # Umask 022 is a good standard umask to prevent new files and dirs
4. # # (second parm) from being group and world writable.
5. # Umask 022 022
6. # <Limit READ WRITE>
7. # DenyAll
8. # </Limit>
9. # <Limit STOR>
10. # AllowAll
11. # </Limit>
12. # </Directory>

#

</Anonymous>

merci

#

1. /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
2. To really apply changes reload proftpd after modifications.

#

1. Includes DSO modules

Include /etc/proftpd/modules.conf

1. Set off to disable IPv6 support which is annoying on IPv4 only boxes.

UseIPv6 on

ServerName "Debian"
ServerType standalone
DeferWelcome off

MultilineRFC2228 on
DefaultServer on
ShowSymlinks on

TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200

DisplayLogin welcome.msg
DisplayChdir .message true
ListOptions "-l"

DenyFilter \*.*/

1. Use this to jail all users in their homes
2. DefaultRoot ~

1. Users require a valid shell listed in /etc/shells to login.
2. Use this directive to release that constrain.
3. RequireValidShell off

1. Port 21 is the standard FTP port.

Port 21

1. In some cases you have to specify passive ports range to by-pass
2. firewall limitations. Ephemeral ports can be used for that, but
3. feel free to use a more narrow range.
4. PassivePorts 49152 65534

1. If your host was NATted, this option is useful in order to
2. allow passive tranfers to work. You have to use your public
3. address and opening the passive ports used on your firewall as well.
4. MasqueradeAddress 1.2.3.4

1. To prevent DoS attacks, set the maximum number of child processes
2. to 30. If you need to allow more than 30 concurrent connections
3. at once, simply increase this value. Note that this ONLY works
4. in standalone mode, in inetd mode you should use an inetd server
5. that allows you to limit maximum number of processes per service
6. (such as xinetd)

MaxInstances 30

1. Set the user and group that the server normally runs at.

User proftpd
Group nogroup

1. Umask 022 is a good standard umask to prevent new files and dirs
2. (second parm) from being group and world writable.

Umask 022 022

1. Normally, we want files to be overwriteable.

AllowOverwrite on

1. Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
2. PersistentPasswd off

1. This is required to use both PAM-based authentication and local passwords
2. AuthOrder *mod_auth_pam.c mod_auth_unix.c

1. Be warned: use of this directive impacts CPU average load!
2. Uncomment this if you like to see progress and transfer rate with ftpwho
3. in downloads. That is not needed for uploads rates.

#

1. UseSendFile off

1. Choose a SQL backend among MySQL or PostgreSQL.
2. Both modules are loaded in default configuration, so you have to specify the backend
3. or comment out the unused module in /etc/proftpd/modules.conf.
4. Use 'mysql' or 'postgres' as possible values.

#

1. <IfModule mod_sql.c>
2. SQLBackend mysql
3. </IfModule>

TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log

<IfModule mod_quotatab.c>
QuotaEngine off
</IfModule>

<IfModule mod_ratio.c>
Ratios off
</IfModule>

1. Delay engine reduces impact of the so-called Timing Attack described in
2. http://security.lss.hr/index.php?page=details&amp;ID=LSS-2004-10-02
3. It is on by default.

<IfModule mod_delay.c>
DelayEngine on
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine off
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>

#

1. Alternative authentication frameworks

#

1. Include /etc/proftpd/ldap.conf
2. Include /etc/proftpd/sql.conf

#

1. This is used for FTPS connections

#

1. Include /etc/proftpd/tls.conf

1. A basic anonymous configuration, no upload directories.

1. <Anonymous ~ftp>
2. User ftp
3. Group nogroup
4. # We want clients to be able to login with "anonymous" as well as "ftp"
5. UserAlias anonymous ftp
6. # Cosmetic changes, all files belongs to ftp user
7. DirFakeUser on ftp
8. DirFakeGroup on ftp

#

1. RequireValidShell off

#

1. # Limit the maximum number of anonymous logins
2. MaxClients 10

#

1. # We want 'welcome.msg' displayed at login, and '.message' displayed
2. # in each newly chdired directory.
3. DisplayLogin welcome.msg
4. DisplayFirstChdir .message

#

1. # Limit WRITE everywhere in the anonymous chroot
2. <Directory *>
3. <Limit WRITE>
4. DenyAll
5. </Limit>
6. </Directory>

#

1. # Uncomment this if you're brave.
2. # <Directory incoming>
3. # # Umask 022 is a good standard umask to prevent new files and dirs
4. # # (second parm) from being group and world writable.
5. # Umask 022 022
6. # <Limit READ WRITE>
7. # DenyAll
8. # </Limit>
9. # <Limit STOR>
10. # AllowAll
11. # </Limit>
12. # </Directory>

#

1. </Anonymous>

Merci

moi en 1999