bonjour,
j´ai la mainboard p35 neo-f celle ci:
http://www.msi-computer.ca/product_info.php?cPath=22_35&products_id=193

et 2 barrettes de ram DDR2 1066 comme celles-ci:
http://www.kingmax.com/product/tinybga/ddr2_1g_1066.htm

de plus le vendeur de chez micro-concept ma cerifié que la DDR21066 était bien reconnu par cette carte mère, mais dans mon bios elle est reconnu en 800

j´ai envoyé mon probleme a la team msi sur le site thai officiel.
voila ce que sa donne:

Your Question
Dear Customers,
Before you issue the questions, we strongly recommend that you should fill out the following basic system configuration.The more detailed you provide, the faster our technical staffs can handle your problems.

1.Product Type: P35 Neo-f
2.BIOS version: 1.3
3.External VGA Type: msi 7900 gs
4.CPU Type: 2 core duo 6750
5.Memory Type: ddr2 1066
6.Power Supply Type: ?
7.Operating System: XP
8.Problem Description:

Your Question.
can it help us there is my bios^^

D.O.T control = disabled
intel EIST = disabled
adjust cpu fsb frequency = 333
adjust cpu frequency = 2667
configure dram timing by spd = enabled
fsb memory ratio = auto
adjusted ddr memory frequenc = 800
adjust pcie frequency = 100
auto disable dimm/pci frequen = enabled
other i don´t know...
mps table version 1.1
execute bit support = disabled
set limit cpuid max val to 3 = disabled
hpet = disable
pci latency time = 64

thanks.

Dear Customer,

We are very sorry for the mistake.
This mainboard supports DDR2 1066 memory. Please go to BIOS to set "FSB Memory Ratio" item as 1:2.00, then your memory can run at 1066MHz.

Best Regards
MSI Technical Support Team 2007-10-9

je met donc ma ram a sur le ratio 1:2.00 puisque 333*2*2=1333

mais est ce que je dois changer aussi mon CPU FSB qui est a 333?
je dois le descendre?

Je suis perdu...snif...