utilisateur
1A20-620E-0010-2363-8673-7062*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ´C:\Program Files\Ahead\nero\Wnaspi32.dll´: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:32
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15i
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 0 TA 2 - 6.6.0.15
Adapter driver: <nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 0 TA 2 - 6.6.0.15
Adapter driver: <nvatabus> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L160P0 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B nvatabus Port 0 ID 2 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4167B D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 147MB (150580kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.7.2007
===== Disc-Copy over image - 1st step : Copy to image ...
18:15:08 #1 Text 0 File Reader.cpp, Line 127
Reader running
18:15:08 #2 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
Last LBA on layer 0 = 1456991 / 0x163B5F / 2845MB
S01 T01 Con 0x14 Start 0 Len 2635056 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
18:15:08 #3 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2635056 = 2635056, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
18:15:08 #4 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
18:15:08 #5 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2635055 (585:34.05, 5146MB)
18:15:08 #6 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
18:15:08 #7 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
18:15:08 #8 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:15:08 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Données (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2635056 (2635056) = #2635056/585:34.6
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2635056 blocks [Image Recorder]
-------------------------------------------------
-------------
18:15:08 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5396594688, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______
___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2635056 | lead-out | 1 | 0x41 | 0x00
18:15:08 #11 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
18:15:08 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
18:15:10 #13 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x068C2000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x00 0x00 0x03 0x0A 0x11 0x00
18:15:10 #14 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
18:15:10 #15 Text 0 File Reader.cpp, Line 385
Exception value: -1128
18:15:10 #16 Text 0 File ThreadedTransfer.cpp, Line 234
conversion failed, stopping writers
18:15:10 #17 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed
===== Disc-Copy over image - 2nd step : Burn the image ...
18:15:08 #1 Text 0 File Reader.cpp, Line 127
Reader running
18:15:08 #2 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
Last LBA on layer 0 = 1456991 / 0x163B5F / 2845MB
S01 T01 Con 0x14 Start 0 Len 2635056 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
18:15:08 #3 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2635056 = 2635056, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
18:15:08 #4 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
18:15:08 #5 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2635055 (585:34.05, 5146MB)
18:15:08 #6 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
18:15:08 #7 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
18:15:08 #8 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:15:08 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Données (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2635056 (2635056) = #2635056/585:34.6
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2635056 blocks [Image Recorder]
-------------------------------------------------
-------------
18:15:08 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5396594688, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______
___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2635056 | lead-out | 1 | 0x41 | 0x00
18:15:08 #11 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
18:15:08 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
18:15:10 #13 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x068C2000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x00 0x00 0x03 0x0A 0x11 0x00
18:15:10 #14 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
18:15:10 #15 Text 0 File Reader.cpp, Line 385
Exception value: -1128
18:15:10 #16 Text 0 File ThreadedTransfer.cpp, Line 234
conversion failed, stopping writers
18:15:10 #17 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed
Existing drivers:
File ´Drivers\CDRALW2K.SYS´: Ver=8.0.0.212 , size=2560 bytes, created 25/08/2006 05:47:00
File ´Drivers\PXHELP20.SYS´: Ver=3.00.33a, size=36528 bytes, created 25/08/2006 05:47:00 (Prassi/Veritas driver for win 2K)
File ´Drivers\InCDfs.SYS´: Ver=4, 3, 18, 0, size=99584 bytes, created 08/07/2005 17:17:54 (InCD4 driver for win NT/2K/XP)
File ´Drivers\InCDpass.SYS´: Ver=4, 3, 18, 0, size=29696 bytes, created 08/07/2005 17:17:36 (InCD4 driver for win NT/2K/XP)
File ´Drivers\InCDrec.SYS´: Ver=4, 3, 18, 0, size=8704 bytes, created 08/07/2005 17:17:56 (InCD4 driver for win NT/2K/XP)
File ´Drivers\nvatabus.sys´: Ver=5.10.2600.0446 built by: WinDDK, size=79360 bytes, created 03/06/2004 10:40:46 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
voici le rapport d´erreur!!!
